Wheels or Tyres: *SOLD* BMW CSL Style Wheels by 3SDM (Used)

[DavidY]

Hi people,

I have for sale my set of 3SDM 0.01 concave wheels. They are similar in style to BMW CSL wheels which is why I purchased them in the first place. They were used on my E92 335d but will fit all E Series BMW and also many more BMW's.

They are finished in satin black and have been touched up in small places along the very edge where they have very minor kerbing.
The details are:
3SDM 0.01 Concave
Satin Black
19 inch
5x120 PCD
ET38 Front, ET33 Rear offsets.
8.5inch wide fronts, 9.5inch wide rears.

These are concave fitment, wider rears and are a HUGE improvement over standard BMW wheels in terms of both strength of the wheel and available grip and handling.
They come with high end Continental ContiSport SportContact 5P tyres all round with good amounts of grip left in them. Fronts have 3mm/4mm/3mm (outside to inside), Rears have 5mm left all over. These tyres are £200+ each when new. (Actually £330 each when i bought them new!)

The alloys are £750 new from rimstyle without tyres. I am looking for £750 for them including the tyres, I will also include 5mm spacers for the front wheels which brings them to the correct offset for most BMW 3 series and also the correct bolts to fit them. All of these are used items in good condition.

If you have any questions then please get in touch and I will answer them as soon as I can.

Regards,

Dave

 

[DavidY]

Additional photos of rear treads...

 

[DavidY]

Open to offers....

 

[DavidY]

£650?

 

[DavidY]

£600? Worth it for the tyres alone....

 

[surprising_skoda]

They were used on my E92 335d but will fit all E Series BMW and also many more BMW's.

Well that's just wrong altogether.

 

[MILLER_102]

Will be a hard enough sale at £600 bud, they dont sell as well as they use to, the amount of them at one stage in the country was mental. Maybe worth trying eBay if your prepared to sent across the water. Il keep an ear out if I hear anyone after a set il send them your way.

 

[DavidY]

£500??? Need these sold ASAP.

 

[Civic0044]

would these fit an e92 m3?

 

[DavidY]

Yes, as far as I can see they are standard E92 M3 width and PCD. The offset may require different spacers though. You are welcome to come over one evening and test fit them on the drive to confirm. Where about's are you? Just message me to arrange (Will have to be next week as I am away to see family)

 

[DavidY]

These are now sold. Not sure how to delete the thread if it can be done. Thanks