Parting out one of my mito builds

Status
This is not open for further replies. We close very old threads, and if this is the case, please start a new one on the same topic.

turbopresh

RMS Regular
Messages
242
Location
belfast
Drives
yamaha r1
As above if anyone is interested in buying the beginnings of a cagiva mito ypvs hybrid give me a shout. I had embarked on a second one of these but time really hasn't allowed me to make much progress on it. I have a chassis here with frame modifications and engine mount kit already fitted, a 350 bottom end, ignitech ecu and modified svf650 wiring loom (could be adapted to fit whatever bike you fancy), new expansion chambers with carbon fibre cans hand made for the build by Kenny at TSA and a lots of other bits and bobs.

The makings of a real good EFI setup for anyone into their two strokes that what to go for an EFI conversion. If anyone is buying the ecu for the purpose of doing the conversion to their own powervalve or the likes I will throw the CV TBs, injectors and associated parts in for free.

Pm if you are interested in anything

Modified svf harness
http://s442.photobucket.com/user/turbopresh/media/2AB8A230-763A-4CAD-A46B-5C8D37CFE6DB_zpsdrmbfkwv.jpg.html



Ignitech 2008 D ecu
http://s442.photobucket.com/user/turbopresh/media/5CBBEEE9-4F5A-41B5-B31D-D0BB361FD228_zpsumyzrfwx.jpg.html


Stainless steel expansion chambers and exhausts for mito/ypvs hybrid

http://s442.photobucket.com/user/turbopresh/media/067BA55D-6F1E-4E9A-A994-1360CAEAF36A_zpscrh91u3n.jpg.html


R6 cv throttle bodies (need spacing finished)
http://s442.photobucket.com/user/turbopresh/media/477C8D77-50E3-4627-919E-427AAACD5DB6_zpszu9gjc3p.jpg.html
 
Last edited:

BLS

RMS Regular
Messages
3,948
Drives
bmw
Pics not working,click on them and saying error.
How much work would there be to finish it.
 

turbopresh

RMS Regular
OP
turbopresh
Messages
242
Location
belfast
Drives
yamaha r1
Whoops... I'll get that sorted when I get onto the pc.. you'll need cylinders, head and a wiring harness if you're not planning on going efi.. few spacers for wheels and brackets for bodywork.. hard to really say how much work there is as from my perspective there's not that much... the biggest part is getting the engine into the frame and brackets welded.
 
  • Like
Reactions: BLS

turbopresh

RMS Regular
OP
turbopresh
Messages
242
Location
belfast
Drives
yamaha r1
Just the ecu and expansion chambers to go for anyone that is interested.
 

turbopresh

RMS Regular
OP
turbopresh
Messages
242
Location
belfast
Drives
yamaha r1
Everything sold except for the ecu, throttle bodies and modified svf harness.. will take £400 for the lot
 
Status
This is not open for further replies. We close very old threads, and if this is the case, please start a new one on the same topic.
Top