1.8T Engine - AGU (engine or whole car)

rosssei

RMS Regular
Messages
3,946
Looking an 1.8T AGU engine and ancillaries for a conversion.

Happy to buy a whole car if it's cheap, out of MOT etc.
 

purplea4T

RMS Regular
Messages
3,967
Location
Bangor
@purplea4T no preference - just fussed on the engine!
Righto, I know some people prefer the cable throttle version for conversions. I might have a lead on a mk4 gti with a recon k03 turbo. You after the box, donkey and ecu/clocks and what sort of £ do you want to spend?
 

jonny.92

RMS Regular
Messages
652
@rosssei I have a K04 turbo from a 1.8T BAM engine code which would require a rebuild due to play in the shaft. I wouldn't need much £ for it if you fancied it.
 

rosssei

RMS Regular
OP
rosssei
Messages
3,946
@purplea4T @hannakournikova

I need the complete engine, ecu and wiring loom. Don't need the gearbox etc. I'm really looking to see if someone has a rotting away mk4 somewhere I can pick up to use - not mega money as I'll be building it before it goes in.
 

dh1079

RMS Regular
Messages
2,316
Location
east belfast
Drives
loads
Hi buddy I have a complete a4 Quattro if it’s any use engine had too end refresh new tensioner etc then car failed mot on exhaust flexi other projects took over from then
 

da.murf

RMS Regular
Messages
10,312
Drives
Nissan 350z
I'm just going to leave this right here....

1568297363390.png


 

purplea4T

RMS Regular
Messages
3,967
Location
Bangor
Would an AUQ 180 be any use to you with a 6 speed box? Would be in a complete car so you could pick off what you want/need.
 
Top