Electronic Repair places in NI

[pablo]

A.E Electronics
64, Green Rd, Ballyclare, County Antrim BT39 9PH
Tel: 028 9334 2270

Classification: TVs, DVD & Video Players - Repairs & Parts

 

[Andy044]

Try this guy i've had several amps reconditioned by him and his work is top notch,
He also gives a 6 month warrenty on his work that he will stand over

M. F. Carter
Cloughmills
Co.Antrim
BT44 9QT
02827638158
07790511278
melvyncar@yahoo.co.uk

 

[dannyfawcett]

Any body know anyone a bit closer to belfast to look at my amp?, cloughmills is a bit far to travel

 

[hutchy_belfast]

A.E Electronics
64, Green Rd, Ballyclare, County Antrim BT39 9PH
Tel: 028 9334 2270

Classification: TVs, DVD & Video Players - Repairs & Parts

Is the only person I'd deal with over here for this kind of thing. Sorted out a very expensive, rare and fairly old Alpine Headunit a few years back and did a great job!

 

[ossy2004]

Wats their prices for just lookin at the head unit? Like a price before hands on and parts if you understand?

 

[Chris Mac]

Greenaway Auto Electics in East Belfast

 

[johna3]

Are greenway any good with audio stuff? Need the sound system in the a3 looked at

 

[ryan_v]

c j collins in doagh do all auto electrics.

 

[jferg]

F M Autoelectrics in newtownards

Really good service and a good guy too

 

[Sonny]

Anyone know of a decent auto electrician in Lurgan, Portadown, Lisburn etc areas?

 

[IL]

Can anyone recommend someone to look at a common repairable fault on OEM Amplifier - Handy to Belfast?

 

[-Pete-]

Can anyone recommend someone to look at a common repairable fault on OEM Amplifier - Handy to Belfast?

Do you already know what the fault is? I've repaired/upgraded a few of my own car amps recently but didn't have to do too much fault finding as I already had a good idea what was wrong to keep it narrowed down. Wasn't going in cold, so to speak.

It could be something really simple like a dry joint where the solder has just broke free on a leg or pin of something and needs re flowed. Usually a good session with the multimeter on continuity check setting is a good start and sometimes you strike lucky with that (just need to be aware of false positives though as sometimes thinks are NOT meant to be closed loop - beep)

Any pictures even?

 

[brocks]

AE Electrics at the start of the thread are still operating (not sure about COVID closures) and are easy paid and only 15 minutes out of Belfast via the A8

 

[ChrisL]

Used a great Auto Electrician for my updated headlights on the Range

ABK Auto Electrics

Mobile service does most of Antrim/Belfast/Down

07565 781354

 

[-Pete-]

@Cartunes mosfets replaced in a gladen monoblock and filter and power supply caps replaced and upgraded in my 450v2 and 350v2 amps
Gordon from genesis did the 1000.2 with full upgrade and bias tweak.
3 way front end sorted!