Dismantling: Polo 9n3 Hybrid Turbo Breaking

Tam9n

RMS Regular
Messages
743
Location
Ballyclare
Drives
Polo 9n3 GTi
So I’m breaking up my little 9n3 GTi 1.8T project.
I’ve so many parts, the below list is just what came to mind. There’s likely more ive forgotten, in addition to standard bits too like the full interior and that.

07729828122 for a quicker response!
Based in Mallusk but travel to Craigavon everyday.

thanks


- 1.8T Forged Engine (overbored 1.8T with 82.5mm Wossner pistons, integrated engineering rifle drilled rods, ARP head stud kit, ARP crank bolt, pinned crank pulley, forge baffled sump, new genuine oil pump, new genuine water pump, new genuine thermostat and housing, new genuine timing belt tensioner, new genuine idler pulley). New gaskets and seals throughout. New pickup pipe and o ring.
- Catcams exhaust cam vernier pulley
- Ported OEM manifold
- BBT K300 turbo and lines
- IWS 3” downpipes with dummy cat.
- 3” Non-Res BlueFlame cutback (comes with resonator)
- Bosch 550cc Injectors
- DW65v FWD fuel pump
- Wellycooler kit with pipework, everything you need. Stainless steel MAP sensor flange pipe.
- 3” maf and pipercross filter.
- Powdercoated satin black rocker cover and inlet manifold (with new injector cups)
- 02M Leon Cupra R gearbox with Quaife LSD and ARP fitting studs. Fabia 6speed driveshafts with brand new GKN outer cv joints and boots. Custom Polo 02M gearbox mount. Machined to fit engine side engine mount bracket.
- CG motorsport 666 single mass flywheel 02m clutch kit with genuine new slavecylinder.
- Vibratechnics Engine mount and gearbox mount and dogbone with power flex insert.
- Fully powder coated with full power flex bushing subframe (console bushes front and rear, arb bushes etc). Powdercoated ARB, Merle Hd drop links. New oem balljoints.
- Front genuine hubs with 5K miles on them.
- KW V1 Coilovers.
- Powdercoated rear axle with 72.5mm power flex bushes and brand new rear hubs and restored stub axles.
- Front 312mm brakes and braided lines, with great condition 312mm discs and brand new Mintex M1144 pads.
- Brand new 256mm rear brake setup - brand new calliper on one side and refurbished and power coated on the other. Comes with powder coated carriers. Brand new pagid discs and pads.
- AEM V2 Methanol Kit with tank and throttle body spacer (creation motorsport with machined portion to allow the nozzle to sit flush)
- New 19mm catch can setup.
- Forge 008p DV.
- Battery relocation kit.
- Rear power coated RARB from white line.
- Upper Seat Sport anthracite powdercoated strut brace.
- Rear upper forge brace.
- Mishimoto Radiator.
- Oversized SFS K300 TIP.

- Front Cup Bumper in LC9Z
- Rear Cup Bumped in LC9Z (very freshly painted)
- Team Dynamics 5x100, 16”, ET38 offset with AD08r on front and Bridgestone Potenzas RE002 on the rear. Tyres all have minimum 6.5mm tread. These wheels are coated with g-tecniq wheel coating.

- Oil pressure gauge setup.
- NewSouth MK5 Golf Boost Guage with Vent Pod.
- EDITION30 MK5 Golf Red Stitched wheel.

- All the normal GTi bits and pieces you’d expect.
 
Top