rosssei
RMS Regular
- Messages
- 3,946
Well ollia_crx off the site asked me to give his dads impreza the once over with the PC. The car was absolutely covered in swirls, and buffer trails the paint was seriously letting the car down, as the bodywork is in such good condition otherwise.
So i started in with the following process:
Wash - Megs Hyper Wash
Clay - Megs Professional Aggressive Clay
Wash - Megs Hyper Wash
Compound - Megs #83 followed by #80
Glaze - Red Moose Machine Glaze
Wax - Dodo Juice
Black Plastics - Elite Car Care Stuff
Tyre Shine - Megs Professional Hyper Dressing
Tried my best to take before pictures -
wing done - bonnet untouched -
Some 50/50s after Megs 83 only -
Finished-
Father and son -
car came up very well, removing around 90% of the marks. would like to get some practice in some time with wet sanding in order to be able to remove deeper scraches!
Comments welcome
Ross
So i started in with the following process:
Wash - Megs Hyper Wash
Clay - Megs Professional Aggressive Clay
Wash - Megs Hyper Wash
Compound - Megs #83 followed by #80
Glaze - Red Moose Machine Glaze
Wax - Dodo Juice
Black Plastics - Elite Car Care Stuff
Tyre Shine - Megs Professional Hyper Dressing
Tried my best to take before pictures -
wing done - bonnet untouched -
Some 50/50s after Megs 83 only -
Finished-
Father and son -
car came up very well, removing around 90% of the marks. would like to get some practice in some time with wet sanding in order to be able to remove deeper scraches!
Comments welcome
Ross