TypeMR shed build heap
- Thread starter PhilM
- Start date
lol
- Thread Starter
- #6
Thanks - its pretty basic build in many ways but plenty of items could be considered 'revA' at this point in time - I'd say some body work not even finished yet may be subject to amendment lol
Packed in the instagram malarkey there was wasting too much time scrolling threw crap I really wasn't that interested in.
Have never really posted much on here about either the starlet or this but will fire some stuff up here now when it comes together a bit more.
Phil
j44nty
RMS Regular
- Messages
- 8,167
Lovely build. That will be entertaining to say the least. Jamiedc2 if you don’t already subscribe has a great build with some useful info.
Subscribed for updates
Subscribed for updates
- Thread Starter
- #8
- Thread Starter
- #15
Anyways - having decided from previously using my starlet gt turbo in the NI hillclimb& sprint championships i wanted to build something cheap(relatively speaking) but fairly focused on going quickly - out came the pencils for a doodle
90% of the internals mentioned in the hand sketch have changed
but as for the lowered and widened MRS outline i think we are pretty much on target for it so far.
Note* panels thrown in place for a pic - Will circle back to that laters.
Phil
90% of the internals mentioned in the hand sketch have changed
but as for the lowered and widened MRS outline i think we are pretty much on target for it so far.
Note* panels thrown in place for a pic - Will circle back to that laters.
Phil
- Thread Starter
- #16
REwind a wee bit there from that last pic....
so this is the beginning of the wide arch malarkey
needed a wider bumper - but didnt like the one i found so that was adjusted (part way through the adjustment in this pic)
smiley face completely removed thereafter.
Phil
so this is the beginning of the wide arch malarkey
needed a wider bumper - but didnt like the one i found so that was adjusted (part way through the adjustment in this pic)
smiley face completely removed thereafter.
Phil
- Thread Starter
- #17
'Built' the engine - million pics taken but these should suffice
View attachment 234340View attachment 234341View attachment 234342
Phil
View attachment 234340View attachment 234341View attachment 234342
Phil
Attachments
- Thread Starter
- #19
found a side profile of the car in CAD and a friend 'Sam Archer' ran some basic CFD for the craic on it.
then i found a second hand simon mcbeathsm183 profile rear wing for cheap and got it bought.
WING
i like this sort of nonsense but hopefully nat too boring reading.
roughly 80kg of DF at 100mph.
Phil
then i found a second hand simon mcbeathsm183 profile rear wing for cheap and got it bought.
WING
i like this sort of nonsense but hopefully nat too boring reading.
roughly 80kg of DF at 100mph.
Phil
veedubnoodle
RMS Regular
Subscribed! This looks awesome!!!
- Thread Starter
- #21
Wing arrived
Got her into work and Scanned here with @davecoupe
circle back to the wing some other time - not a high priority
Phil
Got her into work and Scanned here with @davecoupe
circle back to the wing some other time - not a high priority
Phil
gpaevo
RMS Regular
There was me opening the thread expecting some same old k-swap malarkey. This is another level.
- Thread Starter
- #25