richie_mck
RMS Regular
- Messages
- 5,597
alright guys/gals,
Usually more of a browser on here but thought i'd throw up some pics of my wee mk2. It is a bit of work in progress and have a list of things ive planned for it but the spec is pretty good as she sits. the important bits -
spec [for anyone who's interested]
- cosworth 2.0 with t3 turbo [300-350bhp]
- stage 3 chip
- 2.5 bar map sensor
- -31 actuator
- Yellow injestors
- RS500 intercooler
- cosworth t5 box with close ratio gears and quick shift
- baby atlas axle with lsd [ford ZF with 3.44:1 cwp]
- hydraulic clutch conversion
- panhard rod kit
- compression struts [front] & tension struts [rear] in place of arb's
- wilwood 4 pot brakes with bias adjustment and groved discs up front
- pedal box
- cosworth rear calipers and discs
- hydraulic handbrake
- bilstein coilovers up front
- single leaf decambered springs in rear
- rear lowered on 1.5" lowering block
- full bolt in safety cages roll cage
- sparco bucket seats
- sabelt 4 point harness
- 7x13" rs 4 spoke alloys on continentals
Ill let the pics do the talking and hopefully it'll be legal in a few weeks and i can get her out on the road properly
Usually more of a browser on here but thought i'd throw up some pics of my wee mk2. It is a bit of work in progress and have a list of things ive planned for it but the spec is pretty good as she sits. the important bits -
spec [for anyone who's interested]
- cosworth 2.0 with t3 turbo [300-350bhp]
- stage 3 chip
- 2.5 bar map sensor
- -31 actuator
- Yellow injestors
- RS500 intercooler
- cosworth t5 box with close ratio gears and quick shift
- baby atlas axle with lsd [ford ZF with 3.44:1 cwp]
- hydraulic clutch conversion
- panhard rod kit
- compression struts [front] & tension struts [rear] in place of arb's
- wilwood 4 pot brakes with bias adjustment and groved discs up front
- pedal box
- cosworth rear calipers and discs
- hydraulic handbrake
- bilstein coilovers up front
- single leaf decambered springs in rear
- rear lowered on 1.5" lowering block
- full bolt in safety cages roll cage
- sparco bucket seats
- sabelt 4 point harness
- 7x13" rs 4 spoke alloys on continentals
Ill let the pics do the talking and hopefully it'll be legal in a few weeks and i can get her out on the road properly