My R34 skyline more door

[McFall1984]

A little pic of what's being fitted when Bradley gets it this week
Front facing plenum with top fees rail ( may use my standard fuel rail )
Enlarged throttle body
6 boost manifold
Tomei pon Cams
Precision6262 with a new t3 exhaust housing
46mm precision wastegate
GTR 570 injectors
Walbro 255 pump

 

[Eager]

Should be fun. I see Greg gush done a neo unopened bar some cams last week with basically my spec.

1.5 bar

 

[McFall1984]

Should be fun. I see Greg gush done a neo unopened bar some cams last week with basically my spec.

1.5 bar
View attachment 183962

Impressive figures that

I'm not chasing numbers. Whatever I get I get. My block ain't been opened lol

 

[Eager]

Good job your not chasing numbers lol, ya don’t get them off Richards dyno lol. Think he has a new one coming tho. Greg knows his stuff. Standard inlet manifold on that car too so I’m happy to stick with mine too

 

[McFall1984]

Good job your not chasing numbers lol, ya don’t get them off Richards dyno lol. Think he has a new one coming tho. Greg knows his stuff. Standard inlet manifold on that car too so I’m happy to stick with mine too

I wanna tidy up the bay. Only reason for FFP

 

[Blackie]

Good job your not chasing numbers lol, ya don’t get them off Richards dyno lol. Think he has a new one coming tho.

He is yea, seen a pic on Fakebook of him over in Scotland I believe, buying new setup.

 

[McFall1984]

So hit the shed this morning to see what needs doing
Started by working on the hicas an getting it removed
Turned into a disaster with the bushings really being tight, after almost 20 years im not surprised

Reason I'm deleting the hicas ( rear wheel steer ) is because the rear ball joints are worn an to change its a handling. So I posted this picture last week
Can see the balljoint/boot is knackered

1st had to chop both joints off with the grinder an pulled the hicas out of the car

So I took into it with my new clamp an impact gun

10 mins later the bushing was out an hole cleaned
( Outside was cleaned before I fitted the new bushing dont panic )

Then I sat about getting new bushings in followed by the driftworks hicas eliminator kit

And in it went

 

[McFall1984]

Then I helped a mate with his car an got it off the ground an done a bit of stripping of his v6 vectra

Once he was happy to work away I opened the box of the carbon bonnet an said we need to fit this

So he-man after we had undone the bolts walked off with the old

And on with the new

 

[McFall1984]

Out tonight an made a start on fitting the front bumper
Not a bad fit. Had to cut the top bar as my bonnet is a GTT an has the lip

So back out tomorrow an remove brake calipers an get them blasted an painted

 

[McFall1984]

Out today an fitted Hel brake hoses. Bled the brakes. An took it off the stands to go for a run

Got all wheels on an rear driver wheel was locked
Few attempts of moving an done a small burnout an now out shed is stinking

But got it freed up an took it a run
Then decided it needed a wash as it was covered in crap an dust

And back to normality for another while

 

[McFall1984]

Last night I went out to the shed to see what I could get done
Front bumper back on to go to Bradley's
Abs light sorted
Finally the fuel pump
That was the most awkward thing I've done so far

Got it fitted and car running again

Tonight I'll be out to trace the hicas wiring an out the light out, fit my new anti roll bar and drop links
Fit the wheels an that should be it back on the ground for Bradley to do his thing

 

[vtec1]

when i seen the spoiler i was thinkin this guy shouldnt be allowed to modify cars. but to be honest youve proved me wrong. was never a fan of 4 doors but must must i do like this

 

[McFall1984]

So this morning on my only day off i took in to the anti roll bar and drop links
Old one out with droplinks

new one with new droplinks

Both together

The new whiteline bar is thicker than oem

 

[McFall1984]

Dropped the car to bradley last night with my box of goodies

Fingers crossed all goes to plan easily
Another spoiler arrived today
I think this is the 1 I'll keep

Plans for this will be carbon dip the lot. Boot lid needs a repaint and bumper needs modded an painted

Wheels im hoping will be ready this weekend and the skyline shouldn be to far away depending on bradley

 

[McFall1984]

So lifted the wheels this evening after work
Happy with the result

Now to get new stickers or caps to finish the wheels off

 

[j44nty]

So lifted the wheels this evening after work
Happy with the result
View attachment 188484 View attachment 188481 View attachment 188482 View attachment 188483

Now to get new stickers or caps to finish the wheels off

Wheels look great. What width and tyre as it always interests me.

 

[McFall1984]

Wheels look great. What width and tyre as it always interests me.

Wheels are 19" and 9.5"
Tyres are 225-35
Had 235-35 But was rubbing the rear arches
Now my Yokohama tyres have marks were they rubbed. Hopefully these 225 doesnt rub now

 

[j44nty]

Wheels are 19" and 9.5"
Tyres are 225-35
Had 235-35 But was rubbing the rear arches
Now my Yokohama tyres have marks were they rubbed. Hopefully these 225 doesnt rub now

Yeah nice i was running the same 225/35 on 9.5 last summer with no issue. Dont go down to 215 it dosen’t end well lol.

 

[McFall1984]

Yeah nice i was running the same 225/35 on 9.5 last summer with no issue. Dont go down to 215 it dosen’t end well lol.

When the 235 rubbed I thought 215 will def not rub. But if it's stretching a bit like that with 225. I'd hate to see what 215-35 would look like

 

[j44nty]

When the 235 rubbed I thought 215 will def not rub. But if it's stretching a bit like that with 225. I'd hate to see what 215-35 would look like

Pretty bad and darn right dangerous.

 

[Dub_cub 89]

Dat Stretch!

 

[McFall1984]

Not much happening with the car
Sitting at Bradley's waiting to get tuned
Bought a pair of these today

 

[carmad.]

cool project gary

 

[McFall1984]

cool project gary

Project that'll never end Rory

 

[southsky sunrise]

Project that'll never end Rory

Aye wev all got em lol taking shape Gary