Hi all,
I have a bit of a problem which I'm hoping you can give me a little help with please!
My car is a Mondeo Mk4 2.2 Tit X Estate. some years ago it underwent some "customizations", DPF removal, EGR blanking and re-mapped ECR, it was awsome, excelleration, speed and economy awsome, even the emmisions were amazing at 0.04. Everything was great until it started to drain the battery and cutting out, gave it to a mate who was a mechanic and he traced it to a faulty sensor but for some reason put it into Fords for an ECU upgrade, yes he did know it had been tuned but he thought it neede re-setting!!! so since then, around 3 years, It has had all the work done to tune it but no tuning but was running fine, just one eml error from the EGR blanking. Recently an EML error has appeared on the Converse screen so checked the ECR via the BD to see what the problem was and it was showing a P2002 error. Did a little homework and found that it was probably the DPF preassure hose's, ordered them up, fitted them, cleared the error log and hey presto still had the P2002 error so bit the bullet and replaced the preassure sensor. This made a difference but now I have the following errors:
P2002 particulate efficiancy below threshold additional information component internal failure
P0490 EGR control circuit high (expected)
P2453 particulate preassure sensor A circuit range/performance
P244A particulate differential preassure too low additional fault information signal compare failure
Any assistance very gratefully received.
I have a bit of a problem which I'm hoping you can give me a little help with please!
My car is a Mondeo Mk4 2.2 Tit X Estate. some years ago it underwent some "customizations", DPF removal, EGR blanking and re-mapped ECR, it was awsome, excelleration, speed and economy awsome, even the emmisions were amazing at 0.04. Everything was great until it started to drain the battery and cutting out, gave it to a mate who was a mechanic and he traced it to a faulty sensor but for some reason put it into Fords for an ECU upgrade, yes he did know it had been tuned but he thought it neede re-setting!!! so since then, around 3 years, It has had all the work done to tune it but no tuning but was running fine, just one eml error from the EGR blanking. Recently an EML error has appeared on the Converse screen so checked the ECR via the BD to see what the problem was and it was showing a P2002 error. Did a little homework and found that it was probably the DPF preassure hose's, ordered them up, fitted them, cleared the error log and hey presto still had the P2002 error so bit the bullet and replaced the preassure sensor. This made a difference but now I have the following errors:
P2002 particulate efficiancy below threshold additional information component internal failure
P0490 EGR control circuit high (expected)
P2453 particulate preassure sensor A circuit range/performance
P244A particulate differential preassure too low additional fault information signal compare failure
Any assistance very gratefully received.