Cold air feed piping
- Thread starter Dave
- Start date
- Status
djlee_dj
RMS Regular
if you dont care wat it looks like
b&q do stuff like alu cold feed pipeing
far wider diameter than the k&n one (which is about 15 from halfords) and only about 3-5 quid or so
b&q do stuff like alu cold feed pipeing
far wider diameter than the k&n one (which is about 15 from halfords) and only about 3-5 quid or so
brendy
RMS Regular
- Messages
- 30,014
- Location
- bayyngorr in the S4 Avant
motorfactors sell it in different diameters sizes, usually about a quid or two a foot though, the b&q stuff is a bit too big to route without putting dents and kinks into it.
djlee_dj
RMS Regular
you can nip it all the way round the edge , and fold it back on itself .. then place that facing down
it means you can ge the most diameter possible
cheapest i found ....
if it doesnt work you only loose 2-4quid
yes its silver
it means you can ge the most diameter possible
cheapest i found ....
if it doesnt work you only loose 2-4quid
yes its silver
- Status