NI_Volvo_Nut
RMS Regular
As above, Citroen / Peugeot lump
Anything out there?
Closer to Bangor the better!
Thanks
Andy
Anything out there?
Closer to Bangor the better!
Thanks
Andy
Have seen them and I'm not sure tbh. Have a fear of needing special tools or something to to change it lolWould one of those cartridges do from eBay?
They're pretty cheap. Londonturbos or something like that sells a lot of them
Will check it against mine over the weekend, cheersNot very clear!View attachment 312893
Cheers, definitely not, any advice always gratefully received. Is this gauze accessed from inside the sump or is it the return pipe to the sump?Carryduff auto parts got me one for a mates van with an egr for about 450 brand new. Hope I'm not teaching you to suck eggs here but there's a mesh gauze in the banjo bolt for the oil feed at the block end that can clog along with the pick up in the sump. I cleaned the sump and only caught the banjo bolt by chance
It's behind the heatshield for the cat on the oil feed pipe coming from the block and also check the oil pick up in the sump as the were both bad with carbon build upCheers, definitely not, any advice always gratefully received. Is this gauze accessed from inside the sump or is it the return pipe to the sump?
Obviously there's an oil feed issue which I'll need to sort before fitting a replacement unit.
Finally pulled the turbo off, one I need is GT1544VNot very clear!View attachment 312893
Nah. From what I can gather the GT is the 110bhp and the TD is the 90 bhpYeah mines same too
Did it have the wrong turbo on it?