Do you have any chemicals for hottubs, I'm looking for a flush to clean it out, it seems to be biofilm build up on a new tub from reading online.
I have tried to order a few on amazon but they won't post to NI
Do you have any chemicals for hottubs, I'm looking for a flush to clean it out, it seems to be biofilm build up on a new tub from reading online.
I have tried to order a few on amazon but they won't post to NI
I don’t mate but if you can catch him in between tanning sessions and teeth whitening aul @j16jrf would be able to help with thatDo you have any chemicals for hottubs, I'm looking for a flush to clean it out, it seems to be biofilm build up on a new tub from reading online.
I have tried to order a few on amazon but they won't post to NI
Yep paddy. I’ve normal p40s p60s and p80s coming in as well as the evolution models although I’m not sure on UK launch of the P80 just yet@Big Pimp can you get or are you expecting any of AVA evolution series washers in? I'm particularly interested in the Evolution P80 though the Evolution P60 may also do the job.
Yep paddy. I’ve normal p40s p60s and p80s coming in as well as the evolution models although I’m not sure on UK launch of the P80 just yet
Biggest might not be best though, just depends on what you actually need.
Just not true, more power is always betterBiggest might not be best though, just depends on what you actually need.
I know, same old answer, lol, but since it's "organic" stuff have a go with Lazer, a brush, and hot water.Do you have any chemicals for hottubs, I'm looking for a flush to clean it out, it seems to be biofilm build up on a new tub from reading online.
I have tried to order a few on amazon but they won't post to NI
I know, same old answer, lol, but since it's "organic" stuff have a go with Lazer, a brush, and hot water.
It's not visible, the water looks clear.
It is using a lot of chlorine and from reading up, hottubs are wet tested in the factory and could be then sitting for months allowing bacteria to form, the bacteria is then eating away at the chlorine.
And because its brand new and under warranty I don't really want to throw bleach into it.
I have ordered a biofilm flush on ebay and now waiting to see if they will actually post or reject because they won't post to NI.
Give the Hot Tub Centre a ring when you need anything. They’re based in Moneyreagh, and their chemicals/flushes/additives/cleaners etc are very good.
That said, I usually drain our tub every month and give it a good going over with Anachem Laser diluted with warm water in a spray bottle and a micro fibre, and that lifts any residue that’s left after draining. Laser FG might prove more effective, though Ross could confirm.
Once the tub settles after the first fill, all of the levels should be easily maintained. I just set up our new tub last week and it was perfect on the test strips after just a few days.
Yes mate. This new product I have pretty much finalised is like wet coat / gTechniq easy coat.Fully out of the loop yet again. @Big Pimp have you developed anything along the lines of Gyeon Wetcoat? Is that what Hybrid is similar to?
When do you hope to have it on the website?Yes mate. This new product I have pretty much finalised is like wet coat / gTechniq easy coat.
Where wet coat is a spray on full strength and rinse off and easy coat is spray on using their hose connector and rinse off (clearly more concentrated than gyeon product) mine is the same using the same sprayer.
I actually like where gyeon describe it as 12 washes as opposed to 3 months.
Hybrid is different.
All these super hydrophobic sprays are brilliant at what they do but aren’t extremely glossy. Hybrid is
My Mrs. uses Ross’s antibac stuff to remove sticky residueTried Lazer and Solapower but they won't shift it.
IPA is a good call, I'll try that next. And a microfibre for rubbing, kitchen roll just falls apart and leaves a mess.
My Mrs. uses Ross’s antibac stuff to remove sticky residue