FM155
RMS Regular
- Messages
- 8,768
- Drives
- Alfa 155
@Daviddunlop83
Can't send a photo by pm unfortunately so here it is
The studs are M8 x 1.25 threads and I've drilled one out but my tap couldn't cut it (literally) due to the housing material. (Guessing stainless or inconel)
Difficult shape to securely hold for square drilling in a pillar drill or mill too so I had to do it freehand.
Can't send a photo by pm unfortunately so here it is
The studs are M8 x 1.25 threads and I've drilled one out but my tap couldn't cut it (literally) due to the housing material. (Guessing stainless or inconel)
Difficult shape to securely hold for square drilling in a pillar drill or mill too so I had to do it freehand.