I'm hoping the extra psi of the K4 over my current K2 produces thicker snowfoam, according to some videos I have watched it should produce better foam.
I noticed some difference when I changed from a K2 to a K4 when snow foaming, my only complaint is the K4 has started pulsing all the time which is pretty noisy and annoying.
Simple mate, just a better machine! ive found it a very good pressure washer with only one blip in near 10 years!Is that due to the flow of water it is receiving? The further you go up the range the greater the flow rate is required.
I noticed some difference when I changed from a K2 to a K4 when snow foaming, my only complaint is the K4 has started pulsing all the time which is pretty noisy and annoying.
My Nilfisk is on it’s way out. Think I’m going to upgrade to a Kranzle, anyone on here have one? If so, which model and what’s your thoughts / feedback?
I have the k5, it is a great job I have to say, I started off looking at the K3, then K4 and whatsapp group guys mentioned k5 then I happened to see a K5 with kit reasonably priced on Amazon on Prime so went for it. The remote pressure settings are really handy for removing dirt or just rinsing with no chance of wrecking anything.
Simple mate, just a better machine! ive found it a very good pressure washer with only one blip in near 10 years!
my dad had a k2, it’s ok if you want to clean the dishes but anything else it a bit lacking in power.
hi Mel, it’s the cylinder and head thats probably cracked, the pulsing is it loosing pressure through the crack and re pressurising itself, if it not leaking Water yet you’ll get a bit longer out of it but when that starts it a strip and change, parts are about £60 id guess now, I got mine in the trade place In cars industrial est Portadown, it’s a fiddly job but easy for anyone good with their hands.
Think its 175 in screwfixK4 in argos for £190
I assumed it was something to do with a drop in water pressure as it only started to happen after I moved house, I think there is a repair place in Ards, must get it dropped off and checked when there's a hose pipe ban.
The Vario has 3 modes, soak, regular straight edge and the rotating round pattern. The dirt blasteris the rotating type iirc so does the same job.Do you need to buy the dirt blaster lance with the K5 or does the Vario lance have this? Went to buy a K4 and they’ve sold out
that could be a point as in, if it can pressurise faster than the water can be supplied then that could cause pulsing too! Better get it checked at some point
Anywhere got stock of a K2 at the moment? seems like everyone is buying them at the moment lol
Got mine out of Boucher halfords last month they had a good fewAnywhere got stock of a K2 at the moment? seems like everyone is buying them at the moment lol
Anywhere got stock of a K2 at the moment? seems like everyone is buying them at the moment lol
Once my K4 arrives my K2 will no longer be required.
its not in brilliant condition, the handle is broken off and the hose has a few kinks in it, but it works fine.
You are welcome to it if you want it, it will at least keep you going until you can get a new one.
Obviously the only issue at the moment would be getting it.
Once my K4 arrives my K2 will no longer be required.
its not in brilliant condition, the handle is broken off and the hose has a few kinks in it, but it works fine.
You are welcome to it if you want it, it will at least keep you going until you can get a new one.
Obviously the only issue at the moment would be getting it.
Mind if I hijack this?
Any of you Karcher fans know about a Karcher 670M? (round shape, cord rolls up inside it like a vacuum cleaner)
A relative lent me one to use but it seems pretty weak on washing power so want to make sure I get something better. I just can't find the spec on it to compare to these K2,3,4,5 etc.
When I pull the trigger there is hardly any recoil from it, compared to other ones I've used at car washes and so on.
I'm not too bothered about car washing but would be mostly for deck, concrete, patio, etc. I don't want to spend all day doing a two inch strip at a time.
Thanks for any help.