10% off on eBay (using code: PRICEWIN) at the minute brings the Vyair ones down to £85 odd, so just went ahead and ordered one. Black Cayenne is a pain in the hole to clean - bloody thing is massive.
Where's everyone getting their resin from? Same place or anywhere local to Belfast do it.
Had mine few months now and it's already leaving water marks on the cars. Any ideas? It's showing as 0.77ppm on the wee digital guage with the standard water showing as 17ppm. Any ideas? Only used it about 10 times in total since purchase
Sh1t... been using mine through the power washer for rinsing after pre-wash then final rinse.. Resin might not last long at this rate..
@j16jrf does mine every couple of years. I usually get roughly 2 years from mine. It depends on your water quality to begin. Mine before filtering is 30 or something. Give him a pm and see if he can help you@jshek007 had his refilled recently I believe. He might be able to point us all in the right direction.
Mines measuring 17 from the tap and 0.77 when using the filter but still getting alot of spots with the filter :/@j16jrf does mine every couple of years. I usually get roughly 2 years from mine. It depends on your water quality to begin. Mine before filtering is 30 or something. Give him a pm and see if he can help you
0.77 should definitely not cause any spots. Something else must be wrong or your gauge is faulty maybe. You can have water even up to 15 or 20 and spots really shouldn’t be an issue.
I really don’t know to be honest. Did hear someone talking about brown spots coming out as if the resin was breaking up, maybe something like that is the issue.
Are the spots all over the car or just parts. Wondering could there just be drips of unfiltered water dripping out from cracks but if all over the car that’s not the case. Maybe worth trying another test meter to be sure it’s right, mine only reads in full numbers so it’s unusual to see 0.77 unless it actually means 77 which certainly will spot. Also you mentioned your unfiltered water was 30 which sounds incredibly low as mine is nearly 200.
Depends on the quality of the resin used and the quality of water in your area as to how long it lasts etc
Most using mine get at least 6 Months out of it.
Could someone else have used it and connected the hose the wrong way round?
There could be several things wrong with it. Hardness of the water could be massive which will kill the resin very quickly
Are you still doing refills for these? Can you pm the details if so.
X2 please @j16jrf
Just buy resin yourself and refill. Sureclean in Omagh sell bags of MB115 resin. The most economic way is buy a 25 litre bag for about £90 and you will get a few fills from that depending on the size of your canister. Also worth buying one of their refilling funnels to make the job a lot easier.
Pm'dHow much to refill an 11 litre vessel?
And what advantages does the 400 resin offer over the 115 stuff?